35kv 110kv Gw5 Outdoor High Voltage Disconnect Switch

• Customization: Available
• Type: Fuse Switch Disconnector
• Structure: Single-column Disconnector
• Model NO.: GW5-40.5
• Installation: Outdoor High-voltage
• Operation: Manual
• Grounding Mode: Not Grounding
• Movement Mode: Plug-in Type
• Number of Poles: Three Pole
• Grounding: Single Ground
• Series: Three
• Run: Turn the Horizontal
• Switching Mode: Single Throw-in
• Common Model: YR
• Structure of Operating: Pneumatic
• Certification: IS9001, ISO9001, ISO9002
• Brand: Xikai
• Ax.Voltage: 40.5kv
• Vhether The Smart: Yes
• Mechanical Life: 2000 Times
• Max.Current: 630A/1250A
• Product Name: Outdoor High Voltage Disconnector
• Color: Red
• Frequency: 50Hz,60Hz
• Material: Stainless Steel
• Rated Frequency: 50Hz
• Transport Package: Cartoon
• Specification: 0.125
• Trademark: XIKAI
• Origin: Zhejiang, China

Product Description

 

Product Description

Product Description

Name	Outdoor high voltage disconnector
Material	Stainless steel
Color	Red
Shape	Rectangle
Rated voltage	40.5KV
Rated current	630A/1250A

GW5 is a double-column horizontal fracture center opening type, and a grounding switch can be attached to one or both sides. The isolating switch of 90° transmission adopts CS17 type manual operation mechanism for three-pole linkage operation; the isolation switch of 180° transmission adopts CJ6 type motor operation mechanism or CS17G type manual operation mechanism for three-pole linkage operation; the grounding switch adopts CS17G type manual operation mechanism. The three-pole linkage operation of the driving mechanism.
GW5 series outdoor high-voltage disconnector is a three-phase AC 50Hz outdoor high-voltage electrical appliance, mainly used to open or close the circuit when there is no load current or only capacitive current. When the main switch is in the normal open position, it can provide a visible insulation distance that meets safety requirements, and can also be used to open and close very small capacitive current or inductive current.
Structure
GW5 series disconnectors consist of three independent single poles, each of which includes a base, a support insulator, a lead-out seat and a contact. The disconnector adopts a double-column V-shaped horizontal opening design. Each single pole is installed on the bearings at both ends of the base with two supports and support insulators at an angle of 50 degrees. The main conductive parts are installed above the two support insulators and rotate about 90 degrees with the support insulators.
 

 

 

 

 

 

 

 

Company Information